Author Topic: Provisioning GigaSet N510 Manual Attributes (Provisioning template)  (Read 156 times)

mytechnet

  • Newbie
  • *
  • Posts: 13
  • Karma: 0
    • View Profile
Has someone tried to do so?

I have tried to use:

<SYMB_ITEM value="12" class="symb_item" ID="BS_AE_SwConfig.ucCountryCodeTone"/>
<SYMB_ITEM value="0x19" class="symb_item" ID="BS_IP_Data1.ucI_DIALING_PLAN_COUNTRY_ID"/>
<SYMB_ITEM value="0x0c" class="symb_item" ID="BS_IP_Data1.ucI_HTTPLANGUAGE"/>
<SYMB_ITEM value="0xb8" class="symb_item" ID="BS_IP_Data1.ucI_DSCP_RTP_PRIOR_1"/>
<SYMB_ITEM value="0xb8" class="symb_item" ID="BS_IP_Data1.ucI_DSCP_RTP_PRIOR_2"/>
<SYMB_ITEM value="0xb8" class="symb_item" ID="BS_IP_Data1.ucI_DSCP_RTP_PRIOR_3"/>
<SYMB_ITEM value="0xb8" class="symb_item" ID="BS_IP_Data1.ucI_DSCP_RTP_PRIOR_4"/>
<SYMB_ITEM value="0xb8" class="symb_item" ID="BS_IP_Data1.ucI_DSCP_RTP_PRIOR_5"/>
<SYMB_ITEM value="0xb8" class="symb_item" ID="BS_IP_Data1.ucI_DSCP_RTP_PRIOR_6"/>
<SYMB_ITEM value="0x60" class="symb_item" ID="BS_IP_Data1.ucI_DSCP_SIP_PRIOR_1"/>
<SYMB_ITEM value="0x60" class="symb_item" ID="BS_IP_Data1.ucI_DSCP_SIP_PRIOR_2"/>
<SYMB_ITEM value="0x60" class="symb_item" ID="BS_IP_Data1.ucI_DSCP_SIP_PRIOR_3"/>
<SYMB_ITEM value="0x60" class="symb_item" ID="BS_IP_Data1.ucI_DSCP_SIP_PRIOR_4"/>
<SYMB_ITEM value="0x60" class="symb_item" ID="BS_IP_Data1.ucI_DSCP_SIP_PRIOR_5"/>
<SYMB_ITEM value="0x60" class="symb_item" ID="BS_IP_Data1.ucI_DSCP_SIP_PRIOR_6"/>
<SYMB_ITEM value="0x1" class="symb_item" ID="BS_IP_Data3.ucI_ONESHOT_PROVISIONING_MODE_1"/>
<SYMB_ITEM value="0x1" class="symb_item" ID="BS_IP_Data3.ucI_ONESHOT_PROVISIONING_MODE_2"/>
<SYMB_ITEM value="0x1" class="symb_item" ID="BS_IP_Data3.ucI_ONESHOT_PROVISIONING_MODE_3"/>
<SYMB_ITEM value="0x1" class="symb_item" ID="BS_IP_Data3.ucI_ONESHOT_PROVISIONING_MODE_4"/>
<SYMB_ITEM value="0x1" class="symb_item" ID="BS_IP_Data3.ucI_ONESHOT_PROVISIONING_MODE_5"/>
<SYMB_ITEM value="0x1" class="symb_item" ID="BS_IP_Data3.ucI_ONESHOT_PROVISIONING_MODE_6"/>
<SYMB_ITEM value="0x1" class="symb_item" ID="BS_IP_Data.ucB_AUTO_UPDATE_PROFILE"/>
<SYMB_ITEM value="0x0" class="symb_item" ID="BS_IP_Data1.ucB_DO_CHECK_FOR_FIRMWARE_UPDATES"/>
<SYMB_ITEM value="0x1" class="symb_item" ID="BS_IP_Data1.ucB_DO_CHECK_FOR_PROFILE_UPDATES"/>
<SYMB_ITEM value="0x1" class="symb_item" ID="BS_IP_Data1.ucB_ACCEPT_FOREIGN_SUBNET"/>
<SYMB_ITEM value="0x0" class="symb_item" ID="BS_IP_Data1.ucB_RAP_ENABLE"/>
<SYMB_ITEM value="0x0" class="symb_item" ID="BS_IP_Data1.ucB_SHOW_INFO_SERVICE_SERVER_ADVICE"/>
<SYMB_ITEM value="0x0" class="symb_item" ID="BS_IP_Data1.ucB_INFO_SERVICE_ACTIVE"/>
<SYMB_ITEM value="0x1" class="symb_item" ID="BS_IP_Data1.ucB_SHOW_VOIP_STATUS_ON_HANDSET"/>
<SYMB_ITEM value="http://192.168.99.30:56080/gigaset" class="symb_item" ID="BS_IP_Data1.aucS_DATA_SERVER[0]"/>
<SYMB_ITEM value="http://192.168.99.30:56080/gigaset/gigaset/7C2AA0B1C642.xml" class="symb_item" ID="BS_IP_Data.aucS_CONFIGFILE_URL"/>

But this is not provided to the DECT Base.
I have tried also <VERSION ...> but without success.

How this could be used to set all the needed params?