Author Topic: how to test askozia on pika warp plateform ?  (Read 3190 times)

whitewater

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
how to test askozia on pika warp plateform ?
« on: May 03, 2011, 05:31:24 PM »
hi,

i have got a pika warp. 1 fxs card, 1 bri card.
it work well, but we have got some quality audio problem. internal and external call.

i have difficult to find an issue.

i know askozia on PC plateform with ISO, but i haven't got any BRI or FXS card.
so, i would be happy to give a try to askozia on warp.

i had saw this topic, steps are described :
http://forums.askozia.com/index.php?topic=1354.0

i would like to know, for last step, "Change your Warp bootloader to boot the sd card", it's possible to reverse to boot with pika program ?

thank you for your answer.

whitewater

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Re: how to test askozia on pika warp plateform ?
« Reply #1 on: June 14, 2011, 10:18:04 AM »
humm... a little up ?

Sebastian

  • Askozia Staff
  • Hero Member
  • *
  • Posts: 1139
  • Karma: 43
    • View Profile
Re: how to test askozia on pika warp plateform ?
« Reply #2 on: June 14, 2011, 11:15:28 AM »
Hi whitewater,

the Warp is officially supported with Askozia 2.1 which is going to be released on the 20th of June.

The Warp 2.1 image is completly ready to use (you don't need the explanation from here http://forums.askozia.com/index.php?topic=1354.0 ). You write the warp image to an SD card and boot the Warp with it. No need to change anything in the boot loader anymore. All that happens automatically.

After a couple of minutes the Askozia logo shows up in the display. That indicates that Askozia is ready to be used on the Warp.
If you decide to back to FreePBX, you simply remove the SD card and reboot the Warp.  :)

Of course, all PIKA FXS/FXO and BRI modules for the Warp are supported.