Dave
Newbie
Karma: 0
Posts: 14
|
 |
« Reply #15 on: February 17, 2010, 06:43:05 pm » |
|
Hi The problem was with vista not writing to the cf card. I have managed to get the image installed on the cf card, but I'm having problems booting the image, I get the following from the console port..... TCP cubic registered
NET: Registered protocol family 17
Using IPI Shortcut mode
rtc_cmos rtc_cmos: setting system clock to 2010-02-17 19:01:09 UTC (1266433269)
Freeing unused kernel memory: 284k freed
Mounting /dev, /dev/pts, /proc, /usbfs and /sys ...
Increasing verbosity ...
Populating u/dev ...
checking for livecd...
mount: mounting /dev/hdc on /offload failed: No such file or directory
attempting to mount /offload partition...
waiting for disks to settle and trying again...
The system was unable to find the /offload partition!
Send in the output of (ls /dev) and (fdisk -l) to the
development team to get this fixed.
Thanks...and sorry this is not already working better!
LS /DEV Output:- console ptyvc ttyd7
cpu_dma_latency ptyvd ttyd8
fd ptyve ttyd9
full ptyvf ttyda
kmem ptyw0 ttydb
kmsg ptyw1 ttydc
loop0 ptyw2 ttydd
loop1 ptyw3 ttyde
loop2 ptyw4 ttydf
loop3 ptyw5 ttye0
loop4 ptyw6 ttye1
loop5 ptyw7 ttye2
loop6 ptyw8 ttye3
loop7 ptyw9 ttye4
mem ptywa ttye5
mice ptywb ttye6
network_latency ptywc ttye7
network_throughput ptywd ttye8
null ptywe ttye9
port ptywf ttyea
ptmx ptyx0 ttyeb
pts ptyx1 ttyec
ptya0 ptyx2 ttyed
ptya1 ptyx3 ttyee
ptya2 ptyx4 ttyef
ptya3 ptyx5 ttyp0
ptya4 ptyx6 ttyp1
ptya5 ptyx7 ttyp2
ptya6 ptyx8 ttyp3
ptya7 ptyx9 ttyp4
ptya8 ptyxa ttyp5
ptya9 ptyxb ttyp6
ptyaa ptyxc ttyp7
ptyab ptyxd ttyp8
ptyac ptyxe ttyp9
ptyad ptyxf ttypa
ptyae ptyy0 ttypb
ptyaf ptyy1 ttypc
ptyb0 ptyy2 ttypd
ptyb1 ptyy3 ttype
ptyb2 ptyy4 ttypf
ptyb3 ptyy5 ttyq0
ptyb4 ptyy6 ttyq1
ptyb5 ptyy7 ttyq2
ptyb6 ptyy8 ttyq3
ptyb7 ptyy9 ttyq4
ptyb8 ptyya ttyq5
ptyb9 ptyyb ttyq6
ptyba ptyyc ttyq7
ptybb ptyyd ttyq8
ptybc ptyye ttyq9
ptybd ptyyf ttyqa
ptybe ptyz0 ttyqb
ptybf ptyz1 ttyqc
ptyc0 ptyz2 ttyqd
ptyc1 ptyz3 ttyqe
ptyc2 ptyz4 ttyqf
ptyc3 ptyz5 ttyr0
ptyc4 ptyz6 ttyr1
ptyc5 ptyz7 ttyr2
ptyc6 ptyz8 ttyr3
ptyc7 ptyz9 ttyr4
ptyc8 ptyza ttyr5
ptyc9 ptyzb ttyr6
ptyca ptyzc ttyr7
ptycb ptyzd ttyr8
ptycc ptyze ttyr9
ptycd ptyzf ttyra
ptyce ram0 ttyrb
ptycf ram1 ttyrc
ptyd0 ram10 ttyrd
ptyd1 ram11 ttyre
ptyd2 ram12 ttyrf
ptyd3 ram13 ttys0
ptyd4 ram14 ttys1
ptyd5 ram15 ttys2
ptyd6 ram2 ttys3
ptyd7 ram3 ttys4
ptyd8 ram4 ttys5
ptyd9 ram5 ttys6
ptyda ram6 ttys7
ptydb ram7 ttys8
ptydc ram8 ttys9
ptydd ram9 ttysa
ptyde random ttysb
ptydf rtc0 ttysc
ptye0 tty ttysd
ptye1 tty0 ttyse
ptye2 tty1 ttysf
ptye3 tty10 ttyt0
ptye4 tty11 ttyt1
ptye5 tty12 ttyt2
ptye6 tty13 ttyt3
ptye7 tty14 ttyt4
ptye8 tty15 ttyt5
ptye9 tty16 ttyt6
ptyea tty17 ttyt7
ptyeb tty18 ttyt8
ptyec tty19 ttyt9
ptyed tty2 ttyta
ptyee tty20 ttytb
ptyef tty21 ttytc
ptyp0 tty22 ttytd
ptyp1 tty23 ttyte
ptyp2 tty24 ttytf
ptyp3 tty25 ttyu0
ptyp4 tty26 ttyu1
ptyp5 tty27 ttyu2
ptyp6 tty28 ttyu3
ptyp7 tty29 ttyu4
ptyp8 tty3 ttyu5
ptyp9 tty30 ttyu6
ptypa tty31 ttyu7
ptypb tty32 ttyu8
ptypc tty33 ttyu9
ptypd tty34 ttyua
ptype tty35 ttyub
ptypf tty36 ttyuc
ptyq0 tty37 ttyud
ptyq1 tty38 ttyue
ptyq2 tty39 ttyuf
ptyq3 tty4 ttyv0
ptyq4 tty40 ttyv1
ptyq5 tty41 ttyv2
ptyq6 tty42 ttyv3
ptyq7 tty43 ttyv4
ptyq8 tty44 ttyv5
ptyq9 tty45 ttyv6
ptyqa tty46 ttyv7
ptyqb tty47 ttyv8
ptyqc tty48 ttyv9
ptyqd tty49 ttyva
ptyqe tty5 ttyvb
ptyqf tty50 ttyvc
ptyr0 tty51 ttyvd
ptyr1 tty52 ttyve
ptyr2 tty53 ttyvf
ptyr3 tty54 ttyw0
ptyr4 tty55 ttyw1
ptyr5 tty56 ttyw2
ptyr6 tty57 ttyw3
ptyr7 tty58 ttyw4
ptyr8 tty59 ttyw5
ptyr9 tty6 ttyw6
ptyra tty60 ttyw7
ptyrb tty61 ttyw8
ptyrc tty62 ttyw9
ptyrd tty63 ttywa
ptyre tty7 ttywb
ptyrf tty8 ttywc
ptys0 tty9 ttywd
ptys1 ttyS0 ttywe
ptys2 ttyS1 ttywf
ptys3 ttyS2 ttyx0
ptys4 ttyS3 ttyx1
ptys5 ttya0 ttyx2
ptys6 ttya1 ttyx3
ptys7 ttya2 ttyx4
ptys8 ttya3 ttyx5
ptys9 ttya4 ttyx6
ptysa ttya5 ttyx7
ptysb ttya6 ttyx8
ptysc ttya7 ttyx9
ptysd ttya8 ttyxa
ptyse ttya9 ttyxb
ptysf ttyaa ttyxc
ptyt0 ttyab ttyxd
ptyt1 ttyac ttyxe
ptyt2 ttyad ttyxf
ptyt3 ttyae ttyy0
ptyt4 ttyaf ttyy1
ptyt5 ttyb0 ttyy2
ptyt6 ttyb1 ttyy3
ptyt7 ttyb2 ttyy4
ptyt8 ttyb3 ttyy5
ptyt9 ttyb4 ttyy6
ptyta ttyb5 ttyy7
ptytb ttyb6 ttyy8
ptytc ttyb7 ttyy9
ptytd ttyb8 ttyya
ptyte ttyb9 ttyyb
ptytf ttyba ttyyc
ptyu0 ttybb ttyyd
ptyu1 ttybc ttyye
ptyu2 ttybd ttyyf
ptyu3 ttybe ttyz0
ptyu4 ttybf ttyz1
ptyu5 ttyc0 ttyz2
ptyu6 ttyc1 ttyz3
ptyu7 ttyc2 ttyz4
ptyu8 ttyc3 ttyz5
ptyu9 ttyc4 ttyz6
ptyua ttyc5 ttyz7
ptyub ttyc6 ttyz8
ptyuc ttyc7 ttyz9
ptyud ttyc8 ttyza
ptyue ttyc9 ttyzb
ptyuf ttyca ttyzc
ptyv0 ttycb ttyzd
ptyv1 ttycc ttyze
ptyv2 ttycd ttyzf
ptyv3 ttyce urandom
ptyv4 ttycf usbdev1.1
ptyv5 ttyd0 usbdev1.1_ep00
ptyv6 ttyd1 usbdev1.1_ep81
ptyv7 ttyd2 vcs
ptyv8 ttyd3 vcsa
ptyv9 ttyd4 zero
ptyva ttyd5
ptyvb ttyd6
/ #
fdisk -l -- that doesn't seem to do anything. I'm sorry to be a pain, but I'm out of my depth here with linux Regards Dave |
|
|
|
|
Logged
|
|
|
|
|
giovanni.v
|
|
« Reply #16 on: February 17, 2010, 07:36:14 pm » |
|
Can you post the output from "lspci -k -nn" (no quotes)?
I have a similar issue with a sata only board, just now i'm tryng to fix.
|
|
|
|
|
Logged
|
|
|
|
Dave
Newbie
Karma: 0
Posts: 14
|
|
« Reply #17 on: February 17, 2010, 08:51:21 pm » |
|
This is all I get. / # lspci -k -nn
sh: can't execute 'lspci': No such file or directory
I'm running it on a Soekris net4801 |
|
|
|
|
Logged
|
|
|
|
carlofrc
Full Member
Karma: 0
Posts: 56
|
|
« Reply #18 on: February 17, 2010, 08:59:18 pm » |
|
This is all I get. / # lspci -k -nn
sh: can't execute 'lspci': No such file or directory
I'm running it on a Soekris net4801 ./offload/rootfs/usr/sbin/lspci -k -nn  |
|
|
|
|
Logged
|
|
|
|
Michael
Askozia Staff
Hero Member
Karma: 50
Posts: 1020
|
|
« Reply #19 on: February 17, 2010, 09:09:58 pm » |
|
This is the second report of a Soekris not finding /offload. Really would like to get this fixed before RC2. Anyone know their CF's default device node name?
|
|
|
|
|
Logged
|
|
|
|
|
giovanni.v
|
|
« Reply #20 on: February 17, 2010, 09:39:35 pm » |
|
/ # lspci -k -nn
sh: can't execute 'lspci': No such file or directory
Sorry! Forgot that lspci isn't in the path, should be /usr/sbin/lspci -k -nn |
|
|
|
|
Logged
|
|
|
|
Dave
Newbie
Karma: 0
Posts: 14
|
|
« Reply #21 on: February 17, 2010, 10:14:59 pm » |
|
Hi It's still saying that it cant find it.. / # /usr/sbin/lspci -k -nn
sh: can't execute '/usr/sbin/lspci': No such file or directory
/ # /offload/rootfs/usr/sbin/lspci -k -nn
sh: can't execute '/offload/rootfs/usr/sbin/lspci': No such file or directory
/ #
Michael, it you instruct me on how to obtain the information, it will dig for info. Would it be any help if I post the entire startup output?? Regards Dave |
|
|
|
|
Logged
|
|
|
|
|
giovanni.v
|
|
« Reply #22 on: February 18, 2010, 03:18:16 pm » |
|
This is the second report of a Soekris not finding /offload.
In my little experience when fdisk reports none the kernel was not finding the mass storage device because no drivers/modules for that hardware. So Dave can't run lspci because the system can't read the filesystem. The net4801 (like some old wrap boards by pc engines) has a SCx200 chipset (National) but looking at target/pbx-generic-pc|pbx-embedded/linux.config we have: # CONFIG_BLK_DEV_SC1200 is not setA quite old but useful document about linux&4801 where you can find more details: http://www.brixandersen.dk/papers/net4801/net4801.html. I'm going crazy for a similar problem with a sata ich7 board. Tried to recompile the image adding CONFIG_ATA_PIIX=y in linux.config but this is ignored compiling the kernel but no errors. Any suggestion? |
|
|
|
« Last Edit: February 20, 2010, 10:53:48 am by giovanni.v »
|
Logged
|
|
|
|
Michael
Askozia Staff
Hero Member
Karma: 50
Posts: 1020
|
|
« Reply #23 on: February 18, 2010, 05:22:12 pm » |
|
Some dep wasn't met it seems like.
I usually: make a temporary subdirectory, extract the kernel source there, copy the linux.config in there as .config and run make menuconfig. I tried doing things by hand before but there was always some dependency which wasn't met. Kernel config is still a nightmare.
I just committed huge changes to the embedded and generic-pc kernels which should enable all non-experimental SATA/PATA drivers as well as a bunch of unchecked IDE drivers (including the soekris one).
That should hopefully reduce the reports of unsuccessful /offload mounting...
|
|
|
|
|
Logged
|
|
|
|
|
giovanni.v
|
|
« Reply #24 on: February 18, 2010, 07:58:22 pm » |
|
I just committed huge changes to the embedded and generic-pc kernels which should enable all non-experimental SATA/PATA drivers as well as a bunch of unchecked IDE drivers (including the soekris one).
Whow!... Built and running! Better reports tomorrow morning... |
|
|
|
|
Logged
|
|
|
|
Dave
Newbie
Karma: 0
Posts: 14
|
|
« Reply #25 on: February 18, 2010, 08:30:29 pm » |
|
Hi Michael
I tried the /pbx/snapshots/r1360 snapshot, but the image stops at the same point.
I presume that is the latest image?
Dave
|
|
|
|
|
Logged
|
|
|
|
Michael
Askozia Staff
Hero Member
Karma: 50
Posts: 1020
|
|
« Reply #26 on: February 18, 2010, 09:03:37 pm » |
|
RC1 is actually r1365. I'll not the revision each time from now on...sorry. The latest changes I checked in have not yet been released in an image. To keep up with those changes, check out: https://wush.net/trac/askozia/timelineHopefully something will be up for testing tomorrow. I have a few other bugs still to work out which apply to all platforms. Today I spent nearly 7 hours debugging analog and ISDN drivers on the COMpact 3000 platform....otherwise I would have had an image up tonight. Driver debugging is not my thing. Yuck! |
|
|
|
|
Logged
|
|
|
|
|
giovanni.v
|
|
« Reply #27 on: February 19, 2010, 08:01:12 pm » |
|
Ok, some feedback and quite good news from the test-bench using sources at svn revision 1382 (*).
- SATA support now works (Jetway JNC92-230-LF).
- Now also Via VB7001 works. Boots via CF->IDE adapter, won't recognize the CF->SATA (bios issue).
- Single port FXO PCI card detected and configured, do/receive calls (no further testing).
- Generic HFC PCI card detected/configured (no further testing at this time, I feel that there will be problems...).
- Additional storage detection/formatting/mounting (even at reboot) works, tested on IDE/SATA/USB.
- HFC4S in NT point to point mode seem to work the right way.
(*) garbage in the danish language files stops compilation.
|
|
|
|
|
Logged
|
|
|
|
Michael
Askozia Staff
Hero Member
Karma: 50
Posts: 1020
|
|
« Reply #28 on: February 20, 2010, 07:56:34 am » |
|
Thanks for the reports. Things do look a lot better!
I have to move DAHDI back down to 2.2.0 because of some issues with the COMpact 3000 hardware's custom drivers. They're not even heavily tested so a version bump probably wasn't the smartest idea on my part.
I've ported all of the important stuff back from 2.2.1 so those newly supported cards should still be supported.
Really glad the SATA/expanded IDE support worked.
|
|
|
|
|
Logged
|
|
|
|
socrat3
Full Member
Karma: -1
Posts: 57
|
|
« Reply #29 on: February 21, 2010, 11:47:57 am » |
|
what missing?
fax support
app_konference (video conference)
bluethoot support
|
|
|
|
|
Logged
|
|
|
|
|
