r1318 not working on alix 2d3

[Philip Mullis]

Using image askozia-pbx-generic-pc-x86-i486-uclibc-r1318.img

Ive tried burning it a couple times incase of cf error..

Result is the same..

I see it boot via the console, says its loading Grub 2, a few blank lines appear and then nothing.

Tested all the ethernet ports manually via a static ip and a ping check to confirm if it was a serial console thing or not.. result no response on any ports..

Has anyone else encountered this and have a work around?

Thanks

[bobgus]

Yes, I have exactly the same results.

[Rene]

I've burned r1310 and made then an upgrade to r1318, so I've a running a r1318
on my alix 2d3 (using an 1GB flash). I'm not watching the console at all, but I've a
DHCP server on my monowall (also alix 2c3) where askozia pulls an ip. Ping and
http:// access to this ip works.
Does this procedure  also work on your alix 2d3?
Rene