Big Error

[amee]

Error segfault    





g 20 17:29:14 syslogd started: BusyBox v1.18.4
Aug 20 21:29:16 ntpclient[1364]: Using server: ru.pool.ntp.org
Aug 20 18:29:21 ntpclient[1364]: Time set from remote server via settimeofday()
Aug 20 18:29:21 ntpclient[1364]: Skew -10794883.9mS, freq adjust 0
Aug 20 18:29:21 syslog: Password for 'root' changed
Aug 20 18:29:21 dropbear[1383]: Running in background
Aug 20 18:29:21 provisioning_configure(): pid finder returned:
Aug 20 18:29:21 provisioning_configure(): No existing httpd provisioning server running, not killing.
Aug 20 18:29:21 provisioning_configure(): No phones needing provisioning found, not starting services.
Aug 20 18:29:21 crond[1434]: crond: crond (busybox 1.18.4) started, log level 0
Aug 20 18:29:21 init: starting pid 1438, tty '/dev/tty1': '/etc/rc.initial'
Aug 20 18:29:21 init: starting pid 1446, tty '/dev/tty2': '/sbin/getty 38400 tty2'
Aug 20 18:29:21 init: starting pid 1449, tty '/dev/tty3': '/sbin/getty 38400 tty3'
Aug 20 18:29:21 asterisk[1452]: NOTICE[1443]: cdr.c:1567 in do_reload: CDR simple logging enabled.
Aug 20 18:29:21 asterisk[1452]: NOTICE[1443]: loader.c:1118 in load_modules: 67 modules will be loaded.
Aug 20 18:29:21 asterisk[1452]: NOTICE[1443]: res_smdi.c:1414 in load_module: No SMDI interfaces are available to listen on, not starting SMDI listener.
Aug 20 18:29:21 asterisk[1452]: VERBOSE[1443]: chan_sip.c:29206 in load_module: SIP channel loading...
Aug 20 18:29:26 asterisk[1489]: NOTICE[1485]: cdr.c:1567 in do_reload: CDR simple logging enabled.
Aug 20 18:29:26 asterisk[1489]: NOTICE[1485]: loader.c:1118 in load_modules: 67 modules will be loaded.
Aug 20 18:29:26 asterisk[1489]: NOTICE[1485]: res_smdi.c:1414 in load_module: No SMDI interfaces are available to listen on, not starting SMDI listener.
Aug 20 18:29:26 asterisk[1489]: VERBOSE[1485]: chan_sip.c:29206 in load_module: SIP channel loading...
Aug 20 18:29:31 asterisk[1531]: NOTICE[1527]: cdr.c:1567 in do_reload: CDR simple logging enabled.
Aug 20 18:29:31 asterisk[1531]: NOTICE[1527]: loader.c:1118 in load_modules: 67 modules will be loaded.
Aug 20 18:29:31 asterisk[1531]: NOTICE[1527]: res_smdi.c:1414 in load_module: No SMDI interfaces are available to listen on, not starting SMDI listener.
Aug 20 18:29:31 asterisk[1531]: VERBOSE[1527]: chan_sip.c:29206 in load_module: SIP channel loading...
Aug 20 18:29:36 asterisk[1571]: NOTICE[1567]: cdr.c:1567 in do_reload: CDR simple logging enabled.
Aug 20 18:29:36 asterisk[1571]: NOTICE[1567]: loader.c:1118 in load_modules: 67 modules will be loaded.
Aug 20 18:29:36 asterisk[1571]: NOTICE[1567]: res_smdi.c:1414 in load_module: No SMDI interfaces are available to listen on, not starting SMDI listener.
Aug 20 18:29:36 asterisk[1571]: VERBOSE[1567]: chan_sip.c:29206 in load_module: SIP channel loading...

[Sebastian]

good morning,

currently, there are two known sources of this problem:

#1:the caller ID of the last SIP phones account in the list is less than 16 characters long. 

#2: multiple Askozia phone accounts (e.g. 101, 102, 103,...) for the same (physical) phone (e.g one SNOM 360).

work around for #1: add another SIP phone to your configuration. Make sure its sure its caller ID is longer than 16 characters. Light some incense sticks. 

work around for #2: don't do this. This seems to be a general Asterisk problem, but we are trying to figure it out.

[amee]

This bug appeared after upgrading to new firmware.

[amee]

I have just returned to the firmware version 2.0.4.

[rrr]

Case #2 is a joke, isnt it?

Should I buy, for example, 10 ip-phones per clerk and put it onto his desk, so that he could use multiple identities? This is one of the most important features of voip. Otherwise I'd be better off with my old isdn-pbx.

[raamexpres]

I've got the same error on VMWare with Askozia 2.1.3     

I tried a clean install, re-created all my phones and providers. 

After the first reboot these errors start appearing.

I'm not using Mutiple Askozia Phone accounts on the same physical phone, only 1 per phone.

So I tried adding a phone  account

99999     Caller ID:  Default Extension 99999  also tried  outgoing caller ID :  99999 <999999999999999999> 

This should be longer then 16 characters....   but it's still not working! 
Work around did not work for me