error storage

[user469]

I see this error on two pbx randomly , Version 2.1.1 on Deciso
asterisk[1122]: WARNING[1116]: chan_iax2.c:3228 in reload_firmware: Error opening firmware directory '/storage/usbdisk1/askoziapbx/media/firmware/iax': No such file or directory

[Sebastian]

Please update to 2.1.3. 

[Gil]

Hi Sebastian,

but also with the 2.1.3 update is highlighted message

WARNING[1429]: chan_iax2.c:3228 in reload_firmware: Error opening firmware directory '/storage/usbdisk1/askoziapbx/media/firmware/iax': No such file or directory

Gil

[user469]

Hi Sebastian,

apart from the iax messages on 2.1.3 i get also

Sep  6 09:31:08 dropbear[1315]: wtmp_write: problem writing /var/log/wtmp: No such file or directory
/storage/usbdisk1/askoziapbx/var/log

ls -l /storage/usbdisk1/askoziapbx/var/
total 4
drwxrwxrwx    2 root     root          4096 Sep  6 09:53 log

And on the other deciso 2.1.3 the usb disk are mounted ro instead of rw
/dev/sdb1 on /storage/usbdisk1 type vfat (rw,noatime,fmask=0022,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1)
/dev/sdc1 on /storage/usbdisk2 type vfat (rw,noatime,fmask=0022,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1)
/

With this warning messages of course:
Sep  6 04:30:25 asterisk[1124]: WARNING[1149]: db.c:112 in dbinit: Unable to open Asterisk database '/storage/usbdisk1/askoziapbx/persistence/astdb': Read-only file system

Regards

[Sebastian]

WARNING[1429]: chan_iax2.c:3228 in reload_firmware: Error opening firmware directory '/storage/usbdisk1/askoziapbx/media/firmware/iax': No such file or directory

Hi,

this message occurs if a USB storage wasn't mounted/unmounted properly. Please unmount your storage, restart your system and mount it again. The message should be gone then

One more thing: Please differentiate between warnings and errors. This is just a warning message. Nothing really bad happens here.   

[user469]

Tried to umonut/remount the usb storage , but every time the system reboot it will place it in RO mode .
/dev/sdb1 on /storage/usbdisk1 type vfat (ro,noatime,fmask=0022,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1)
/dev/sdc1 on /storage/usbdisk2 type vfat (ro,noatime,fmask=0022,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1)

dmesg shows
FAT: Filesystem panic (dev sdb1)
    invalid access to FAT (entry 0x101005d8)
FAT: Filesystem panic (dev sdb1)
    invalid access to FAT (entry 0x101005d8)
FAT: Filesystem panic (dev sdc1)
    clusters badly computed (2020 != 2019)
    File system has been set read-only

fsck.vfat does not exist , what can i do remotely to solve the problem ?

[user469]

Sebastian,

Still need fsck.vfat for fixing the error .

Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 1015056 512-byte hardware sectors: (519 MB/495 MiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda:<6>ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
 sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: [sdb] 15556608 512-byte hardware sectors: (7.96 GB/7.41 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: [sdb] Unhandled sense code
sd 2:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sdb] Sense Key : 0x3 [current]
sd 2:0:0:0: [sdb] ASC=0x11 ASCQ=0x0
end_request: I/O error, dev sdb, sector 30351
sd 3:0:0:0: [sdc] 15556608 512-byte hardware sectors: (7.96 GB/7.41 GiB)
sd 2:0:0:0: [sdb] Unhandled sense code
sd 2:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sdb] Sense Key : 0x3 [current]
sd 2:0:0:0: [sdb] ASC=0x11 ASCQ=0x0
end_request: I/O error, dev sdb, sector 30352
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 03 41 00 00
sd 3:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Unhandled sense code
sd 2:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sdb] Sense Key : 0x3 [current]
sd 2:0:0:0: [sdb] ASC=0x11 ASCQ=0x0
end_request: I/O error, dev sdb, sector 30353
sd 3:0:0:0: [sdc] Assuming drive cache: write through
 sdc:<6>sd 2:0:0:0: [sdb] Unhandled sense code
sd 2:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sdb] Sense Key : 0x3 [current]
sd 2:0:0:0: [sdb] ASC=0x11 ASCQ=0x0
end_request: I/O error, dev sdb, sector 30356
 sdc1
sd 2:0:0:0: [sdb] Unhandled sense code
sd 2:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sdb] Sense Key : 0x3 [current]
sd 2:0:0:0: [sdb] ASC=0x11 ASCQ=0x0
end_request: I/O error, dev sdb, sector 30357
sd 2:0:0:0: [sdb] Unhandled sense code
sd 2:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sdb] Sense Key : 0x3 [current]
sd 2:0:0:0: [sdb] ASC=0x11 ASCQ=0x0
end_request: I/O error, dev sdb, sector 30358
sd 3:0:0:0: [sdc] Attached SCSI removable disk

[user469]

I think there is something wrong with the external storage .
On three 2.1.3 system all have the same kind of error .
FAT: Filesystem panic (dev sdb1)
    clusters badly computed (24655 != 24654)
    File system has been set read-only
The file system on the storage at some point gets corrupted .
Wich is the maximum supported size for the external usb storage , 1gb , 2gb , 4gb , 8gb or ?

[Sebastian]

Did you try a different USB drive already?

[user469]

Yes , two system had usb flash disks but it also destroyed a third system with an external usb SSD/SATA disk used for logs .

[user469]

Hi Sebastian

Still having problem with usb storage on two systems with 2.1.5 on deciso .

FAT: Filesystem panic (dev sdb1)   clusters badly computed (61599 != 61598)
/dev/sdb1 on /storage/usbdisk1 type vfat (ro,noatime,fmask=0022,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1)

FAT: Filesystem panic (dev sdb1)  fat_get_cluster: invalid cluster chain (i_pos 0)
FAT: Filesystem panic (dev sdc1)   fat_get_cluster: invalid cluster chain (i_pos 0)
/dev/sdc1 on /storage/usbdisk2 type vfat (ro,noatime,fmask=0022,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1)
/dev/sdb1 on /storage/usbdisk1 type vfat (ro,noatime,fmask=0022,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1)

The file system on the storage at some point gets corrupted .

Some question again ...
- Wich is the maximum supported size for the external usb storage , 1gb , 2gb , 4gb , 8gb or ?
- can i use two usb storage at the same time ?
- need fsck.vfat for fixing the error ?