r1701 still have a problem with Digium TDM410P

[yuo]

~ # lspci
00:00.0 Class 0600: Device 10b9:1541 (rev 04)
00:01.0 Class 0604: Device 10b9:5243 (rev 04)
00:02.0 Class 0c03: Device 10b9:5237 (rev 03)
00:07.0 Class 0601: Device 10b9:1533 (rev c3)
00:08.0 Class 0200: Device 10ec:8139 (rev 10)
00:0b.0 Class 0200: Device d161:8005 (rev 11)
00:0f.0 Class 0101: Device 10b9:5229 (rev c1)
01:00.0 Class 0300: Device 1002:4742 (rev 5c)

00:0b.0 Class 0200: Device d161:8005 (rev 11)
        Subsystem: Device d161:8005
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
        Latency: 32 (16000ns min, 32000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 12
        Region 0: I/O ports at e400 [size=256]
        Region 1: Memory at e8001000 (32-bit, non-prefetchable) [size=1K]
        Expansion ROM at e7000000 [disabled] [size=128K]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel modules: wctdm24xxp




wctdm24xxp: Unknown symbol voicebus_transmit
wctdm24xxp: Unknown symbol voicebus_current_latency
wctdm24xxp: Unknown symbol vpmadt032_echocan_create
wctdm24xxp: Unknown symbol voicebus_stop
wctdm24xxp: Unknown symbol gpakPingDsp
wctdm24xxp: Unknown symbol voicebus_start
wctdm24xxp: Unknown symbol vpmadt032_get_default_parameters
wctdm24xxp: Unknown symbol voicebus_release
wctdm24xxp: Unknown symbol vpmadt032_init
wctdm24xxp: Unknown symbol gpakAlgControl
wctdm24xxp: Unknown symbol voicebus_set_minlatency
wctdm24xxp: Unknown symbol voicebus_vbb_cache
wctdm24xxp: Unknown symbol vpmadt032_echocan_free
wctdm24xxp: Unknown symbol __voicebus_init
wctdm24xxp: Unknown symbol gpakConfigureChannel
wctdm24xxp: Unknown symbol vpmadt032_alloc
wctdm24xxp: Unknown symbol vpmadt032_free
wctdm24xxp: Unknown symbol gpakConfigurePorts
wctdm24xxp: Unknown symbol voicebus_transmit
wctdm24xxp: Unknown symbol voicebus_current_latency
wctdm24xxp: Unknown symbol vpmadt032_echocan_create
wctdm24xxp: Unknown symbol voicebus_stop
wctdm24xxp: Unknown symbol gpakPingDsp
wctdm24xxp: Unknown symbol voicebus_start
wctdm24xxp: Unknown symbol vpmadt032_get_default_parameters
wctdm24xxp: Unknown symbol voicebus_release
wctdm24xxp: Unknown symbol vpmadt032_init
wctdm24xxp: Unknown symbol gpakAlgControl
wctdm24xxp: Unknown symbol voicebus_set_minlatency
wctdm24xxp: Unknown symbol voicebus_vbb_cache
wctdm24xxp: Unknown symbol vpmadt032_echocan_free
wctdm24xxp: Unknown symbol __voicebus_init
wctdm24xxp: Unknown symbol gpakConfigureChannel
wctdm24xxp: Unknown symbol vpmadt032_alloc
wctdm24xxp: Unknown symbol vpmadt032_free
wctdm24xxp: Unknown symbol gpakConfigurePorts



~ # cat /proc/interrupts
           CPU0
  0:     138191    XT-PIC-XT        timer
  1:          8    XT-PIC-XT        i8042
  2:          0    XT-PIC-XT        cascade
  8:          0    XT-PIC-XT        rtc0
  9:          0    XT-PIC-XT        acpi
 10:        302    XT-PIC-XT        eth0
 11:          0    XT-PIC-XT        ohci_hcd:usb1
 14:      14554    XT-PIC-XT        ide0
 15:         12    XT-PIC-XT        ide1
NMI:          0   Non-maskable interrupts
LOC:          0   Local timer interrupts
SPU:          0   Spurious interrupts
TRM:          0   Thermal event interrupts
ERR:          0
MIS:          0

[Michael]

I noticed that output too when building an image yesterday. It's since been corrected and will be available in the next developer snapshot.

Once that becomes available, could you report back if it is working?

Thanks for reporting!

[yuo]

I will try to test it soon, when next snapshot will be released on web?  
I hope i can receive the next developer snapshot ASAP.
would you mind if you can release the latest snapshot asap?
Thank you very much.

[Michael]

I just updated the developer snapshots:
 - http://forums.askozia.com/index.php/topic,1343.0.html

Let me know if the card works now.

[timbo]

Hello,

I have just tried the dev snapshot r1732 (embedded version) and don't have any luck seeing the TE410P card (or a 210P for that matter) in the GUI... is there another trick or some other diag commands to run?

Cheers,

Tim